|
This unique kit will allow you to crimp most any connector/cable combination from RG-58 to RG-214 as well as the Belden cables 9913, 9914. It will crimp BNC, N type, TNC, UHF and mini-UHF connectors. RFA-4005 is supplied with one RFA-4005-200 crimping tool frame and two dies sets, the RFA 4005-01 and the RFA-4005-02. All contained in a durable, padded, self-storage case. |
  |
| The RFA-4006, Deluxe Kit, is supplied with two crimping tool frames and the same two unique die sets as the RFA-4005. |
Standard Die Sets
| All dies are precision diecast, not pressed, powdered metal. Change crimp dies with ease, using a Phillips or standard screwdriver. |
 |
The RFA-4005-01 die set is used to crimp RG58/U, RG59/U, RG142/U, RG8X, Proflex and various video cables. Cavity dimensions: .052", .068", .100", .213", and .55". The .052" cavity is unique and used to crimp the center pins of the RFU-600-1 or AMP's 2266-001. |  |
The RFA-4005-02 die set is used to crimp RG8/U, RG213/U, RG214/U, and Belden 9913 cables. Cavity dimensions: .100", .128", and .429". The .128" cavity crimps the center pin on Belden 9913 cable. This is the only die set with a .128" cavity for 9913 pins. |
Optional Die Sets
 |
RFA-4005-04 .239", .068", .319" for RG-58/U, RG-59/U, RG-62/U and Cambridge Connectors Series CP-88 and CP-89. |
 |
RFA-4005-07 .213", .184", .068", .042" for RG-58/U and RG-174/U CoaxConnectors (RFI Cable Groups B and C). |
 |
RFA-4005-05 .155", .184", .215" for Fiber Optic Connectors |
 |
RFA-4005-08 .315", .255", .068", .042" for RG-59/U and Belden 8281 Coax Cable (RFI Groups D and G) |
 |
RFA-4005-06 .255", .324", .350" for RG-59/U, RG-6/U and F-Type (CATV) Coax Connectors. |
 |
RFA-4005-09 .178", .130", .068" for RG-174/U, RG-188/U, RG-316/U and Mini 59/U Coax Connectors (RFI Cable Group B). |
 |
RFA-4005-10 .080", .100", .429" for RG-8/U, RG-11/U and RG-213/U, N-Series Coax Connectors (RFI Cable Group E). |
RFA-4005-20 Crimp Handle
| The RFA-4005-20 crimp handle is precision manufactured of high-carbon, heat-treated, stamped steel and designed for smooth and rapid die closure. A simple pressure adjustment resets the scissors facet mechanism to compensate for different crimp dies and crimp forces. When the correct die is used, the full cycle ratchet will not release until a clean and tight crimp is achieved. Should a mismatch occur, the disengagement lever quickly releases the ratchet mechanism. |  |